Rx Information
Order Process Information
Login Required
Pet Rescue Rx. - Profits go to a shelter of your choice!
Questions? Call Us at 1-855-307-7940
SNAP Parvovirus Antigen Test Kit

SNAP Parvovirus Antigen Test Kit by Idexx

   Pharmacy Required
New Prescription
Shipping Information   Order Process Information
11119 11120

SNAP* Parvo
SNAP Canine Parvovirus Antigen Test Kit

The SNAP Canine Parvovirus Antigen Test Kit is a rapid enzyme immunoassay for the detection of canine parvovirus (CPV) antigen in canine feces. This test detects a surface protein antigen of CPV (including intact virus particles) shed in the feces of CPV-infected dogs

- Store at 2-25°C until the expiration date.
- All components must be at room temperature (18-25°C) before running the test. Do not heat. This will take at least 30 minutes depending upon the temperature of your laboratory.

Precautions and Warnings
- Do not mix components from kits with different lot numbers.
- Properly dispose of contaminated materials and disinfect work areas.
- Do not use a SNAP device that has been activated prior to the addition of sample.
- The sampling swab is not designed to be used rectally.
- Lubricants may reduce test sensitivity by reducing the volume of feces tested.
WARNING: Conjugate - H316/P332+P313/EUH208. Causes mild skin irritation. If skin irritation occurs: Get medical advice/attention. Contains Kathon. May produce an allergic reaction.

Sample Information
- Samples must be at room temperature (18-25°C) before beginning the test procedure.
- Canine fecal matter is required for this test. Swabs are provided for sampling.
- Fecal samples can be stored at 2-8°C for 24 hours. If longer storage is required, samples should be frozen.

Test Procedure
1. If stored in a refrigerator, allow all components to equilibrate at room temperature (18°C-25°C) for 30 minutes. Do not heat.
2. Obtain a sampling swab and a SNAP device for each sample to be tested. Pull and twist the tube covering the swab tip to remove the tube from the swab/reagent bulb assembly (A). Using the swab, coat the swab tip with fecal material. Then, return the swab to the tube (B).

NOTE: Only a thin coat of fecal material on the swab is required; do not coat the swab with excess feces.

3. Break the purple valve stem inside the bulb assembly by bending the assembly at the narrow neck (C). (Rebending the opposite way may be helpful.) Squeeze the reagent bulb three times to pass the blue solution through the swab tip and mix it with the sample (D).
4. Place the SNAP device on a horizontal surface. Using the swab as a pipette, dispense 5 drops of the fluid into the sample well, being careful not to splash contents outside of the sample well (Figure 1).

The sample will flow across the result window, reaching the activation circle in 30-60 seconds. Some sample may remain in the sample well.
5. When color FIRST appears in the activation circle, push the activator firmly until it is flush with the device body (Figure 2).

NOTE: Some samples may not flow to the activation circle within 60 seconds, and, therefore, the circle may not turn color. In this case, press the activator after the sample has flowed across the result window.
6. Read the test result at 8 minutes.

**See Insert for Result Interpretations and Other important information from the manufacturer.

Customer Reviews

Be the first to write a review of this product.

Please use this link for proper methods of disposing unused medicine.
Mon - Fri 9am to 5pm EST
Saturday 9:30am-12pm EST
Email Us

Pet Rescue Rx
PO Box 362
13760 Indian Falls Road
Akron, NY 14001

Advantage II for Cats
Advantage II for Dogs
Assurity for Cats
K9 Advantix II for Dogs
Advantage Multi for Cats
Advantage Multi for Dogs
Heartgard Chewable for Dogs
Heartgard Chewables for Cats
Heartgard Plus Chewables
Iverhart Max
Revolution for Cats
Banamine Paste
Deramaxx Chew Tabs
Animax Ointment
Baytril Otic
Epi-Otic Advanced Ear Cleanser
Otomax Ointment
Cosequin ASU Equine
Cosequin DS for Dogs
Cosequin for Cats
Dasuquin Chew Tabs
Deramaxx Chew Tabs